ACCUMULATION ROTARY TABLE 48″ DIAMETER WITH UNSCRAMBLER-NEW-STAINLESS STEEL-MADE IN THE USA

$2,797.00

NEW 48″ DIAMETER /STAINLESS STEEL ACCUMULATION ROTARY TURN TABLE WITH USCRAMBLER

ACCUMULATION ROTARY TABLE SPECIFICATIONS:
TABLETOP DIAMETER: 48″
MATERIAL: FRAME MADE OUT OF STAINLESS STEEL
DISC: STAINLESS STEEL 1/8″ THICKNESS
OTHER SPECIFICATIONS: OUTSISE RIM LIP TO PREVENT PACKAGES FROM FALLING OFF TABLE
ADJUSTABLE HEIGHT: UP TO 37″ H (FROM FLOOR TO DISC)
ACCUMULATING TABLE MAXIMUM WEIGHT CAPACITY: 800 LBS PER SQ FT.
TABLE ADJUSTABLE RAIL HEIGHT: 0-5″H
ELECTRICAL REQUIREMENTS: 115 V

MOTOR SPECIFICATIONS:
BRAND: DAYTON

TECHNICAL SPECS
• Item DC Gear motor
• Gear motor Type DC Gear motor
• Gear motor Voltage 90VDC
• Max. Torque 500.0 in.-lb.
• Gear motor Shaft Type Single
• Gear motor Shaft Orientation Parallel
• Rear Shaft Encoder/Pulse Generator Mounting No
• Nameplate RPM 6
• Gear motor Enclosure Totally Enclosed Non ventilated
• Gear motor Mounting Position All Angle
• Length Less Shaft 8-7/8″
• Reversible Shaft Output No
• Overhung Load 300 lb.
• Input HP 1/11
• Gear Ratio 264:1
• Full Load Amps 1.10
• Insulation Class F
• Thermal Protection None
• Max. Ambient Temp. 40 Degrees C
• Gear motor Rotation CW/CCW
• Motor Type Permanent Magnet DC
• Overall Length 10-1/4″
• Keyway Size 9/50″ Square x 1″
• Bearings Ball and Needle on Case, Ball on Motor
• Lubrication Grease Filled
• Brushes Externally Replaceable
• Finish Unpainted
• Gear Material Hardened Steel
• Gear Type Helical and Spur
• Gear Case Die Cast Aluminum
• Seals Lip Type on Input and Output Shaft
• Housing Material Die Cast Aluminum
• Standards cRUus
• Replacement Brushes 6YHY6

SPEED CONTROL SPECIFICATIONS:

BRAND-DART

TECHNICAL SPECS

• Item DC Speed Control
• Enclosure NEMA 4/12
• Max. Amps 3
• Voltage Output 0 to 90/180VDC
• Speed Range 25:1
• Rotation Reversable
• External Switches CW/CCW
• AC Input Voltage 120/240VAC
• DC Speed Control SCR
• HP @ Lower Volts 1/50 to 1/3
• HP @ Higher Volts 1/25 to 2/3
• Linear Acceleration Fixed 0.5 sec.
• Current/Torque Limit None
• Speed Regulation +/-1% of Base Speed
• Shunt Wound Volts 100/200VDC
• Accepts Tach Feedback No
• Dynamic Braking No
• IR Compensation Adjustable
• Follower Circuit No
• Mount Type Compact Panel
• Height 5.5″
• Depth 3.5″
• Width 3.81″
• Operating Temp. -10 Degrees to 45 Degrees C
• Standards cULus Recognized
• Includes Speed Potentiometer Knob and Dial Plate

Optional Attachment: Feeding table or transition table-Used to attach Conveyor with Table.
Additional Cost for feeding table/transition table-Only $100.00. Look at the last picture on the listing to see what a feeding table/transition table is.
Please contact us at [email protected] or call us at 786-310-7253 if you need this attachment so we can add the $100 to the Total Invoice amount at checkout. Also, let us know if your products are moving from the conveyor onto the table or from the table onto the conveyor (this information is needed in order to place the feeding table/transition table on the right side.

“WE ARE SHIPPING THIS ITEM IN A WOOD CRATE” TO PROTECT IT.
WOOD CRATE DIMENSIONS AND TABLE WEIGHT:
55” x 55″ x 72″ (L x W x H )
TOTAL WEIGHT: 220 Lbs

LOCATION: HIALEAH, FLORIDA 33013
WE HAVE OUR OWN MANUFACTURING FACILITY
CUSTOMIZATION AVAILABLE FOR THE ENTIRE US TERRITORY

REFUND: We will refund any item returned within 14 days of our shipment, provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance.
Freight shipments must be thoroughly inspected prior to accepting delivery. We are not responsible for any damages or shortages once a freight shipment has been signed for.
• Any damages or missing items must be noted to the freight driver at the time of delivery.

MADE IN THE USA
PLEASE CONTACT US IF YOUR HAVE ANY QUESTIONS. WE ARE HERE TO HELP YOU.
THANK YOU